| ¡¡¡¡¡¡¡ñ Product catalog£º |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
| ¡¡¡¡ ¡ò Product demonstration |
Physical property table £º
| TEST |
|
| Resistance To Surface Wear |
Abrase Change |
400Revs |
| External Surface |
External Here |
| Attrition Tese |
¡Ü 0.08g/100 Revs |
| Resistance To Immersion In Boiling Water |
Surface |
No Blistering |
| Dimensional Stability |
¡Ü10% |
| Thickness Stability |
¡Ü10% |
| Surface Resistance |
Cleanability |
No Effect |
| Resistance To Cigarette Burns (120 Seconde) |
Slight Change No Effect |
| Surface 180 ¡æ¡À 1 ¡æ Radiant |
¡Ý 60 No Effect |
| Impact Resistance |
Surface |
No Effect |
| Formability |
|
¡Ý58.8N/mm2 |
| Dimension Stability |
Machine Direction |
¡Ü 0.45 |
| Cross Direction |
¡Ü0.9 |
|
Application method £º
¡¡¡¡¡ñ Choose appropriate material such as veneer, flakeboard, medium density fiberboare.
¡¡¡¡¡ñ Choose appropriate glue such as strong adhesive, dehydrated ureaformaldehyde glue, latex glue.
¡¡¡¡¡ñ Apply strong adhesive on the surface of the base board and the decoration laminate. After 5 to 10 minutes, place the laminate onto the base board carefully and put pressure on the board. Then squeeze the air out of the boards and wipe the glue seeping out, If using the dehydrated ureafoemaldehyde glue or the latex glue, it takes at least 12 hours to keep putting pressure on the boards and the temperature of the environment should be between 25¡æ and 30¡æ.
¡¡ |
|
|
 |
|
